[Original paper]
1. Takamasa Mori, Tsukasa Ochi, Kenta Kitamura, Characterization of slurries for lithium-ion battery cathodes by measuring their flow and change in hydrostatic pressure over time and clarification of the relationship between slurry and cathode properties, Journal of Colloid and Interface Science, 629 (2023) 36-45.

[Review]
1. Takamasa Mori, Effect of Particles Dispersion State and Packing Ability of the Slurry on the Density of Green Body for Ceramics Wet Shaping Processes, J. Jpn. Soc. Powder Powder Metallurgy, 70 (2023) 185-190 [In Japanese].

[International conference]
1. Takamasa Mori, Characterization of multi-component dense slurry for controlling particles packing structure during coating and drying -In the case of cathode slurry for Li-ion battery-, Materials for Sustainable Development Conference (MAT-SUS23), Valencia, Spain, 2023.3.6 [Invited lecture]

[Original paper]
1. Kenta Kitamura, Masaki Tanaka, Takamasa Mori, Effects of the mixing sequence on the graphite dispersion and resistance of lithium-ion battery anodes, Journal of Colloid and Interface Science, 625 (2022) 136-144.

2. Takamasa Mori, Natsum iIseki, Yu Ito, Kenta Kitamura, Thickening of aqueous nanoparticle suspension using DC electric field, Colloids and Surfaces A: Physicochemical and Engineering Aspects., Volume 648 (2022) 129387.

3. Takamasa Mori, Hitoshi Nakazawa, Naoya Iwata, Kenta Kitamura, Establishment of Quick Evaluation Method of Slurry Packing Ability and Its Application for Prediction of Green Sheet Density, J. Soc. Powder Technol., Japan, 59 (2022) 400–406 [In Japanese].

4. Takamasa Mori, Yui Komiya, Mitsuyasu Yabe, Effect of a micronization method on the particle-size distribution and eluted phosphate-ion concentration for methane fermentation residue sludge, Cogent Engineering, 9:1 (2022) 2138869.

[International conference]
1. Takamasa Mori, Fuki Koike, Yu Ito, Kenta Kitamura, Continuous particle aggregation and quick sedimentation for aqueous slurries by using DC electric field, 9th World Congress on Particle Technology (WCPT9), Madrid, Spain, 2022.9.20.

2. Takamasa Mori, Daiki Takahashi, Daiki Fuji, Kenta Kitamura, The change of particles dispersion state in slurries during thickening and its effect on the density of green bodies, ICCCI2022 & 57th Summer Symposium on Powder Technology, Fujiyoshida, Japan, 2022.11.17.

[Original paper]
1. Kenta Kitamura, Yuto Mochizuki, Takamasa Mori, Study on particle dispersion changes over time in aqueous Al2O3 slurries containing ammonium polyacrylate, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 622 (2021) 126623-126623.

2. Takamasa Mori, Kotaro Murakami, Mitsuyasu Yabe, Investigation of the direct utilization possibility of methane fermentation residue sludge as liquid fertilizer by micronization, Environmental Technology, (2021) DOI: 10.1080/09593330.2021.2020908.

[International conference]
1. Takamasa Mori, Slurry characterization for ceramics wet forming process -importance of evaluating particle packing ability of slurry for control of green density, The 8th Asian Particle Technology Symposium (APT2021), Osaka, Japan, 2021.10.11 [Invited lecture].

2. Kenta Kitamura, Tsukasa Ochi, Takamasa Mori, Effect of dispersion state of acetylene black particles on the electrode density and volume resistivity for a cathode of Li-ion battery, The 8th Asian Particle Technology Symposium (APT2021), Osaka, Japan, 2021.10.11.

[Original paper]
1. Kosuke Nakamura, Naoya Iwata, Takamasa Mori, Effects of eluted metal ions on the properties of ceramic slurry and slip-casted green bodies, Journal of Asian Ceramic Societies, 8 (2020) 528–536.

2. Naoya Iwata, Saori Yamada, Takamasa Mori, Effect of medium condition change on green body density during casting and drying, International Journal of Applied Ceramic Technology, 18 (2021) 384-393.

3. Michito Kishi, Masaki Tanaka, Takamasa Mori, Influence of Ionomer Adhesion Ratio of Catalyst Layer on Electrode Characteristics of Polymer Electrolyte Fuel Cell, J. Soc. Powder Technol., Japan, 57 (2020) 4–11 [In Japanese].

[Original paper]
1. Naoya Iwata, Takamasa Mori, Effect of binder addition on optimum additive amount of dispersant for aqueous BaTiO3 slurry, Ceramics International, 45 (2019) 19644–19649.

2. Takamasa Mori, Hiroto Imazeki, Gaku Tsutsui, Evaluation of nano particles slurries by osmotic pressure measurement and its application to fabrication process of nano composite materials, Nano-Structures & Nano-Objects, 18 (2019) 100306.

3. Michito Kishi, Masaki Tanaka, Takamasa Mori, Preparation procedure for the electrode slurries of polymer electrolyte fuel cells utilizing the irreversibility of ionomer adsorption onto Pt-C particles, Journal of the Ceramic Society of Japan 127 (2019) 942–951.

4. Naoya Iwata, Takamasa Mori, Determination of optimum slurry evaluation method for the prediction of BaTiO3 green sheet density, Journal of Asian Ceramic Societies, 8 (2020) 83–192.

[International conference]
1. Takamasa Mori, Characterization of particle dispersion state in dense slurries, International Conference and Exhibition on Powder Technology Indonesia (ICePTi 2019), Surakarta, Indonesia, 2019.8.21 [Keynote lecture]

2. Naoya Iwata, Saori Yamada, Takamasa, Mori, Proposal of a Novel Slurry Evaluation Index to Predict Ceramics Green Sheet Density, The 2nd International Conference and Exhibition on Powder Technology Indonesia (ICePTi2019), Surakarta, Indonesia, 2019.8.21 [Student Award]

3. Takamasa Mori, Saori Yamada, Naoya Iwata, Estimation of green body density from slurry characterization by using sedimentation and filtration test for slip casting and tape casting processes, The 13th Pacific Rim Conference of Ceramic Societies (PACRIM13)，Okinawa, Japan，2019.10.29.

4. Naoya Iwata, Takamasa Mori, Effect of Slurry Characteristics on Generation of Drying Defect in Ceramics Green Sheet, The 13th Pacific Rim Conference of Ceramic Societies (PACRIM13)，Okinawa, Japan，2019.10.29.

5. Nana Kitai, Naoya Iwata, Takamasa Mori, Hiroshi Satone, Establishment of a novel universal index to predict particle packing ability for various slurries, The 18th Asian Pacific Confederation of Chemical Engineering Congress (APCChE 2019), Sapporo, Japan, 2019.9.25

6. Gaku Tsutsui, Takamasa Mori, JunIchiro Tsubaki, Investigation of Osmotic Pressure Generation and Water Sucking Behavior for the Dense Sediment of Well-Dispersed Slurry, The 18th Asian Pacific Confederation of Chemical Engineering Congress (APCChE 2019), Sapporo, Japan, 2019.9.25

7. Kosuke Nakamura, Takamasa Mori, Naoyuki Ishida, Influence of Eluted Metal Ions on the Density of Green Body for Slip Casting, The 13th Pacific Rim Conference of Ceramic Societies (PACRIM13)，Okinawa, Japan，2019.10.28.

[Original paper]
1. Michito Kishi, Shohei Moriyama, Takamasa Mori, Investigation of the Influence of Slurry Properties and Electrode Microstructure on the Performance of Polymer Electrolyte Fuel Cell, J. Soc. Powder Technol., Japan, 55 (2018) 366–374 [In Japanese].

2. Takamasa Mori, Evaluation of particles dispersion and flocculation state in slurries by using various pressure measurement，J. Jpn. Soc. Powder Powder Metallurgy, 65 (2018) 640-645 [In Japanese].

3. Takamasa Mori, Hirotaka Nagashima, Yu Ito, Yusuke Era, JunIchiro Tsubaki, Agglomeration of Fine Particles in Water Upon Application of DC Electric Field, Minerals Engineering, 113 (2019) 119-126.

[International conference]
1. Naoya Iwata, Mariko Morisono, Takamasa Mori, Prediction of the BaTiO3 Green Sheet Density by Using Hydrostatic Pressure Measurement, The 6th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials (ICCCI2018), 2018.7.9.

2. Michito Kishi, Takamasa Mori, Influence of Ionomer Adhesion Ratio of Catalyst Layer on Electrode Characteristics of Polymer Electrolyte Fuel Cell, The 6th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials (ICCCI2018), 2018.7.9.

[Original paper]
1. Naoya Iwata, Takamasa Mori, Effects of Particle Dispersion on the Properties of Suspension-Sprayed Coatings, J. Ceram. Soc., Japan, 125 (2017) 1-6.

2. Hiroshi Satone, Kenji Iimura, Koharu Satone, JunIchiro Tsubaki, Takamasa Mori, Effects of Slurry Conditions on the Measurement Accuracy of a Manometer-Type Hydrostatic Pressure Measurement System, Engineering and Technology, 4 (2017) 48-55.

3. Takamasa Mori, Takuya Muramatsu, Tomoki Mori, Evaluation of Particle Dispersion and Aggregation State for Various Nano Particle Suspensions by Osmotic Pressure Measurement, J. Jpn. Soc. Colour Mater., 90 (2017) 1-10.

4. Takamasa Mori, Saori Yamada, Naoya Iwata, Effects of suspension properties on the microstructure of Al2O3 coatings deposited onto macroporous SiC substrate, Surf. Coat. Technol., 326 (2017) 1-10.

5. Takamasa Mori, Riku Kitagawa, Experimental Study on the Time Change in Fluidity and Particle Dispersion State of Alumina Slurries with and without Sintering Aid, Ceram. Inter., 43 (2017) 13422-13429.

6. Takamasa Mori, Shogo Sase, Kenta Kitamura, Forward Osmosis Using Temperature-Responsive Slurries as a Draw Solution, Am. J. Environ. Eng. Sci., 4 (2017) 20-29.

7. Takamasa Mori, Hiroto Imazeki, Keita Yamamoto, Kentaro Tsuchiya, Effects of a slurry’s particle dispersion and flocculation state on spray-dried granule morphology, Ceram. Inter., 43 (2017) 11170-11176.

8. Takamasa Mori, Shohei Moriyama, Takuto Nakagawa, JunIchiro Tsubaki, Measurement of apparent viscosity of various fluids by using B-type and vibration-type viscometers, Journal of the Society of Rheology, Japan, 45 (2017) 157-165.

[International conference]
1. Takamasa Mori, Takuto Nakagawa, Shohei Moriyama, Measurement of Apparent Viscosity of Non-Newtonian Fluids by using B-type and Vibration-type Viscometers, The 7th Asian Particle Technology Symposium, Taoyuan, Taiwan, 2017.8.2.

2. Naoya Iwata, Takamasa Mori, Effect of Dispersant and Binder Additive Dosage on the Crack Formation in Graphite Green Sheets, 9th Asian Coating Workshop, Tokyo, Japan, 2017.5.18.

3. Saori Yamada, Takamasa Mori, Influence of Slurry Properties on Coatings of Fine Particles on Porous Substrates, 9th Asian Coating Workshop, Tokyo, Japan, 2017.5.18.

4. Naoya Iwata, Takamasa Mori, Effect of Particle Dispersion State on Properties of Sprayed Coating for Suspension Spraying, The 7th Asian Particle Technology Symposium, Taoyuan, Taiwan, 2017.8.2.

[International conference]
1. Takamasa Mori, Shohei Moriyama, Michito Kishi, EFFECT OF SLURRY PROPERTIES ON THE MICROSTRUCTURE OF PEFC ELECTRODE, The 20th International Drying Symposium (IDS 2016), Gifu, JAPAN, 2016.8.7.

[Original paper]
1. Hiroshi Satone, Masaya Morita, Takayoshi Kiguchi, JunIchiro Tsubaki, Takamasa Mori，Effect of Surface Roughness of Filter Media on Filtration Flux, Engineering and technology，2 (2015) 345-351.

[International conference]
1. Takamasa Mori, Kenta Kitamura, Adsorption behavior of polyelectrolyte onto hydrophobic and hydrophilic surface, 7th International Symposium on Advanced Plasma Science and Its Application for Nitrides and Nanomaterials, ISPlasma2015, Nagoya, Japan, 2015.3.26

2. Takamasa Mori, Shohei Moriyama, JunIchiro Tsubaki, Comparison of Apparent Viscosity of Various Suspensions by Using Viscometers with Different Measurement Principle, The 6th Asian Particle Technology Symposium, APT2015, Seoul, Korea, 2018.9.15.

[International conference]
1. Takamasa Mori, Yusuke Era, Takayoshi Kiguchi, JunIchiro Tsubaki, Development of a chemical-free flocculation method for fine particles in aqueous suspensions by using DC field, 21st International Congress of Chemical and Process Engineering, CHISA2014, Prague, Czech, 2014.8.26.

[Original paper]
1. Takamasa Mori, JunIchiro Tsubaki, John-Paul O’shea, George V. Franks, Hydrostatic pressure measurement for evaluation of particle dispersion and flocculation in slurries containing temperature responsive polymers, Chem. Eng. Sci., 85 (2013) 38-45.

[Original Paper]
1. JunIchiro Tsubaki, Takamasa Mori, Toshiyuki Konishi, Akihisa Tsuruta, Hidetoshi Mori, Toyokazu Yokoyama, Sadanobu Matsubara, Mechanical characterization of spray-dried granules by compression stress-relaxation technique -analysis of compression behavior-, Journal of the Ceramic Society of Japan, 107 (1999) 1093-1098 [In Japanese].

2. JunIchiro Tsubaki, Takamasa Mori, Toshiyuki Konishi, Akihisa Tsuruta, Hidetoshi Mori, Toyokazu Yokoyama, Sadanobu Matsubara, Mechanical characterization of spray-dried granules by compression stress-relaxation technique -analysis of relaxation behavior-, Journal of the Ceramic Society of Japan, 107 (1999) 1183-1187 [In Japanese].

3. Takamasa Mori, Hidetoshi Mori, JunIchiro Tsubaki, Optimization of Experimental Conditions for the Compression and Stress Relaxation Test of Spray-Dried Granules, J. Ceram. Soc. Japan, 110 (2002) 155-158.

4. JunIchiro Tsubaki, Takamasa Mori, Hiroo Yamakawa, Hidetoshi Mori, Hardness measurement of particulate matter, J. Soc. Powder Technol., Japan, 39 (2002) 339-345 [In Japanese].

5. JunIchiro Tsubaki, Hiroo Yamakawa, Takamasa Mori, Hidetoshi Mori, Optimization of Granules and Slurries for Press Forming, J. Ceram. Soc. Japan, 110 (2002) 894-898.

6. JunIchiro Tsubaki, Takamasa Mori, Hiroo Yamakawa, Hidetoshi Mori, Hardness measurement of particulate matter -Comparison between experimental and estimation, J. Soc. Powder Technol., Japan, 39 (2002) 800-805 [In Japanese].

7. JunIchiro Tsubaki, Hyo-Jung Kim, Takamasa Mori, Tadamitsu Sugimoto, Hidetoshi Mori, Yasunori Sasaki, New evaluation technique for slurry characterization by constant pressure filtration, J. Soc. Powder Technol., Japan, 40 (2003) 438-443 [In Japanese].

8. Takamasa Mori, JunIchiro Tsubaki, Evaluation of breaking and/or deforming behavior for particulate matter, PHARM TECH JAPAN, 20 (2004) 141-148 [In Japanese].

9. Takamasa Mori, Makoto Iro, Tadamitsu Sugimoto, Hidetoshi Mori, JunIchiro Tsubaki, Slurry characterization by hydrostatic pressure measurement -effect of initial height on sedimentation behavior-, J. Soc. Powder Technol., Japan, 41 (2004) 522-528 [In Japanese].

10. Hyo-Jung Kim, Takamasa Mori, JunIchiro Tsubaki, Effects of solid concentration and dispersant dosage on sedimentation behavior, J. Soc. Powder Technol., Japan, 41 (2004) 656-662 [In Japanese].

11. Hyo-Jung Kim, Takamasa Mori, JunIchiro Tsubaki, Development of Slurry Characterization Method by Constant Pressure Filtration –Analysis of Cake Forming Behavior-, J. Ceram. Soc. Japan, 113 (2005), 761-767.

12. Takamasa Mori, Kiyohito Kuno, Makoto Ito, JunIchiro Tsubaki, Tomohiro Sakurai, Slurry Characterization by Hydrostatic Pressure Measurement –Analysis Based on Apparent Weight Flux Ratio-, Adv. Powder Technol., 17 (2006) 319-332.

13. Takamasa Mori, Hyo-Jung Kim, Kenjiro Ato, JunIchiro Tsubaki, Measuring Packing Fraction Distribution in Cake Filtered under Constant Pressure and Quantitative Estimation from Measured Filtrate Volume, J. Ceram. Soc., Japan, 114 (2006) 318-322.

14. Tomohiro Sakurai, Takamasa Mori, JunIchiro Tsubaki, A New Slurry Evaluation Technique by Using Ultrasonic Attenuation, Adv. Powder Technol., 17 (2006) 531-541.

15. JunIchiro Tsubaki, Takamasa Mori, Tseveen Unenbat, Bayanjargal Ochirkhuyag, Development of A Novel Slurry Condensation Method by Applying Dispersant Instead of Flocculant, J. Soc. Powder Technol., Japan, 43 (2006) 731-736 [In Japanese].

16. Takamasa Mori, Tomofumi Yamada, Tatsuya Tanaka, Akiko Katagiri, JunIchiro Tsubaki, Effects of Slurry Properties on the Crack Formation in Ceramics Green Sheet during Drying, J. Ceram. Soc., Japan, 114 (2006) 823-828.

17. Hiroshi Satone, Takehiro Mamiya, Asami Harunari, Takamasa Mori, JunIchiro Tsubaki, Solidification mechanism of the sediment formed by particle settling -Analysis of the final state of the sediment-, Adv. Powder Technol., 19 (2008) 293-306.

18. Bayanjargal Ochirkhuyag, Takamasa Mori, JunIchiro Tsubaki, Takahisa Katsuoka, Hiroshi Satone, Hee-kyu Choi, Tadamitsu Sugimoto, Development of a High Performance Cake-less Continuous Filtration System, Chem. Eng. Sci., 63 (2008) 5274-5282.

19. Hee-kyu Choi, Bayanjargal Ochirkhuyag, JunIchiro Tsubaki, Takamasa Mori, Tadamitsu Sugimoto, Jung-Eun Lee, The Development of a High Functional Continuous Filtration System for Sericite Powders, Korean J. Chem. Eng., 25 (2008), 1165-1169.

20. JunIchiro Tsubaki, Takahisa Katsuoka, Takahiro Yamada, Hiroshi Satone, Takamasa Mori, Tadamitsu Sugimoto, Development of a novel high performance continuous cake-less filtration system, Waste Management and the Environment, 4 (2008) 761-770.

21. Hiroshi Satone, Takahiro Mamiya, Takamasa Mori, JunIchiro Tsubaki, Solidification mechanism of the sediment formed by particle settling -Analysis of the formation of the solidified layer-, Advanced Powder Technol. 20 (2009) 41-47.

22. JunIchiro Tsubaki, Takamasa Mori, Unenbat Tseveen, Ochirkhuyag Bayanjargal, Development of A Novel Slurry Condensation Method by Applying Dispersant Instead of Flocculant, Advanced Powder Technol., 20 (1), 106-110 (2009) [Translated paper]
23. Takamasa Mori, Naoya Hirasawa, Ryuta Ito, JunIchiro Tsubaki, Ceramic Coating on Metal Substrate by Electropholetic Deposition Assisted by Sweeping Flow in Aqueous Suspension, Key Engineering Materials, 412 (2009) 21-26.

24. Takamasa Mori, Ikue Inamine, Reiko Wada, Takafumi Hida, Takayoshi Kiguchi, Hiroshi Satone, JunIchiro Tsubaki, Effects of Particle Concentration and Additive Amount of Dispersant on Adsorption Behavior of Dispersant to Alumina Particles, J. Ceram. Soc., Japan, 117 (2009) 917-921.

25. Kazuki Asai, Masaaki Ichiyanagi, Hiroshi Satone, JunIchiro Tsubaki, Yoko Ito, The influence of Non-Newtonian property on the apparent viscosity measured by single cylinder rotational viscometer (Type-B viscometer), J. Soc. Powder Technol., Japan, 46 (2009) 873-880 [In Japanese].

26. Takamasa Mori, Hiroshi Satone, Takayuki Hirata, JunIchiro Tsubaki, Development of a novel high performance cake-less filtration system, Water Pollution, 10 (2010) 325-332.

27. Takatoshi Kimura, Koichiro Nakaushiro, Hiroshi Kariya, Takamasa Mori, JunIchiro Tsubaki, A study on optimizing dough plasticity for manufacturing insulators, J. Soc. Powder Technol., Japan, 47 (2010) 539-544 [In Japanese].

28. Takayoshi Kiguchi, Ikue Inamine, Hiroshi Satone, Takamasa Mori, JunIchiro Tsubaki, Effect of dispersant dosage on settling behavior, J. Soc. Powder Technol., Japan, 47 (2010) 616-622 [In Japanese].

29. Takatoshi Kimura, Koichiro Nakaushiro, Hiroshi Kariya, Takamasa Mori, JunIchiro Tsubaki, Seasonal changes in the aggregate status of particles in dough used in the manufacture of insulators, J. Soc. Powder Technol., Japan, 47 (2010) 539-544 [In Japanese].

30. Hiromi Ohtsuka, Hidetoshi Mizutani, Satoshi IIO, Kazuki Asai, Takayoshi Kiguchi, Hiroshi Satone, Takamasa Mori, JunIchiro Tsubaki, Effects of sintering additives on dispersion properties of Al2O3 slurry containing polyacrylic acid dispersant, J. Euro. Ceram. Soc., 31 (2011) 517-522.

31. Takahisa Katsuoka, Hiroshi Satone, Takahiro Yamada, Takamasa Mori, JunIchiro Tsubaki, Development of a novel high performance filtration system -Optimization of operating conditions, Powder Technol., 207 (2011) 154-158.

32. Hiroshi Satone, Kazuki Nishiuma, Kenji Iimura, Michitaka Suzuki, Takamasa Mori, JunIchiro Tsubaki, Particle size measurement by hydrostatic pressure measurement method -effect of initial concentration, J. Soc. Powder Technol., Japan, 48 (2011) 456-463 [In Japanese].

33. Kazuki Asai, Keisuke Naganawa, Takamasa Mori, JunIchiro Tsubaki, Direct observation and characterization of particle assembling state in suspension, J. Soc. Powder Technol., Japan, 48 (2011) 518-525 [In Japanese].

34. Hiroshi Satone, Takahisa Katsuoka, Kazuki Asai, Takahiro Yamada, Takamasa Mori, JunIchiro Tsubaki, Development of a novel high performance filtration system -Application for various hardly filterable materials, Powder Technol., 213 (2011) 48-54.

35. Tatsuya Tanaka, Kazuki Asai, Takamasa Mori, JunIchiro Tsubaki, Evaluation of particle assembling state in slurries for a cathode of Li-ion battery, J. Soc. Powder Technol., Japan, 48 (2011) 761-767 [In Japanese].

36. Takayoshi Kiguchi, Masashi Tanaka, Takamasa Mori, JunIchiro Tsubaki, Hiroshi Satone,Effects of polyelectrolyte dispersant conformation and magnesium ion on adsorption to slurry particles, J. Soc. Powder Technol., Japan, 49 (2012) 100-107 [In Japanese].

37. Kazuki Asai, Keisuke Naganawa, Takamasa Mori, JunIchiro Tsubaki, Direct observation and characterization of effect of preparing condition on particle assembling state in suspension, J. Soc. Powder Technol., Japan, 49 (2012) 177-183 [In Japanese].

38. Takayoshi Kiguchi, Takamasa Mori, JunIchiro Tsubaki, Adsorption and desorption mechanism of carboxylate to alumina particles, J. Soc. Powder Technol., Japan, 49 (2012) 274-280 [In Japanese].

39. Takamasa Mori, Yukari Hori, Huang Fei, Ikue Inamine, Kazuki Asai, Takayoshi Kiguchi, JunIchiro Tsubaki, Experimental study about the agglomeration behavior in slurry prepared by adding excess polyelectrolyte dispersant, Adv. Powder Technol., 23 (2012) 661-666.

[Review]
1. JunIchiro Tsubaki, Takamasa Mori, Preparation and evaluation of slurry, PHARMSTAGE, 5 (2005) 65-77 [In Japanese].

2. Takamasa Mori, JunIchiro Tsubaki, Novel approach to characterization and control of fine particle suspensions, J. Soc. Powder Technol., Japan, 45 (2008) 835-843 [In Japanese].

3. Takamasa Mori, A novel approach to evaluate slurry properties -How can we predict the properties of final products through the evaluation of slurry properties?-, J. Soc. Powder Technol., Japan, 46 (2009) 269-274 [In Japanese].

4. Takamasa Mori, JunIchiro Tsubaki, From spray-drying to press forming -What is the best granules for press forming?-, Funtai Gijyutsu, 3 (2011) 30-34 [In Japanese].

5. Takamasa Mori, Kazuki Asai, Takayoshi Kiguchi, JunIchiro Tsubaki, A novel characterization technique of particles dispersion and aggregation state for nano-sized particle suspensions, Funtai Gijyutsu, 4 (2012) 1100-1103 [In Japanese].

[International conference]
1. Mori, A. Tsuruta, H. Mori and J. Tsubaki : “Effect of Compression Rate on the Compression and Stress Relaxation Test of Spray-Dried Granules”, 7th International Conference on Ceramic Processing Science (1999), Inuyama, Japan

2. T. Mori, A. Tsuruta, H. Mori and J. Tsubaki : “Optimization of Experimental Conditions for the Compression and Stress-Relaxation Test of Spray-Dried Granules”, First Asian Particle Technology Symposium (APT2000) (2000), Bangkok, Thailand

3. T. Mori, H. Yamakawa, H. Hirose, H. Mori and J. Tsubaki : “Measuring the Hardness of Particles by a Compression and Stress Relaxation Test”, 4th World Congress on Particle Technology (2002), Sydney, Australia

4. T. Mori, J. Tsubaki, T. Sugimoto and T. Sakurai : “Characterization of Slurry Compressibility by Different Measurement Principles”, Proceedings of The 2nd Asian Particle Technology Symposium 2003 (APT2003) volume 2, 23-28 (2003)

5. T. Mori, T. Yamada and J. Tsubaki : “Development of Slurry Characterization Method for Tape Casting Process”, The Korea-Japan International Symposium on Powder Science and Technology, 490-493, (2005), Busan, Korea

6. J. Tsubaki, B. Ochirhuyag, K. Ato, T. Mori, H. K. Choi and T. Sugimoto : “Development of a High Performance Cake-Less Continuous Filtration System”, Proceedings of International Conference & Exhibition for Filtration and Separation Technology volume1, 51-56 (2005)

7. T. Mori, K. Kuno, M. Ito and J. Tsubaki : “Slurry Characterization by Hydrostatic Pressure Measurement –Analysis Based on Mass Flux Ratio-“, 8th Japan-Australia Colloid and Interface Science Gakkai, (2005), Terrigal, Australia

8. T. Mori, B. Ochirhuyag, S. Tanaka, J. Tsubaki, H. K. Choi and T. Sugimoto : “Development of High Performance Cake-less Continuous Filtration System”, 8th Japan-Australia Colloid and Interface Science Gakkai, (2005), Terrigal, Australia

9. T Mori, T. Yamada and J. Tsubaki : “Development of Slurry Characterization Method for Tape Casting Process”, 5th World Congress on Particle Technology, (2005), Florida, U.S.A.

10. B. Ochirkhuyag, H. Choi, K. Ato, T. Mori and J. Tsubaki : “Development of a High Performance Cake-less Continuous Filtration System”, Proceedings of the ISETS05 International Symposium on Ecotopia Science, 739-740 (2005), Nagoya, Japan

11. J.Tsubaki, B.Ochirkhuyag, K.Ato, T.Mori, H.K.Choi and T.Sugimoto : “Development of a High Performance Cake-less Continuous Filtration System”CHISA 2006, Prague, Czech Republic, (2006)

12. T. Mori, T. Yamada, T. Tanaka and J. Tsubaki : “Slurry Characterization by Stress Relaxation Test for Tape Casting Process”, Proceedings of 31st International COCOA BEACH Conference & Exposition on Advanced Ceramics & Composites, (2007), Florida, U.S.A.

13. B. Ochirkhuyag, T. Katsuoka, T. Sugimoto, T. Mori and J. Tsubaki : “Development of a High Performance Cake-less Continuous Filtration System – The Effect of Filter Diameter”, Proceedings of The Third Asian Particle Technology Symposium (APT2007), vol.1, 138-145 (2007), Beijing, China

14. T. Mori, A. Ito, R. Ito and J. Tsubaki : “Fabrication of Ceramic Coatings on Metal Substrate by Electrophoretic Deposition of Aqueous Slurries”, Proceedings of The Third Asian Particle Technology Symposium (APT2007), vol.2, 650-654 (2007), Beijing, China

15. I. Inamine, T. Hida, R. Wada, T. Mori and J. Tsubaki : “Adsorption behavior of polycarboxylic acid ammonium on alumina particles”, Proceedings of The Third Asian Particle Technology Symposium (APT2007), vol.1, 18-22 (2007), Beijing, China

16. H. Satone, T. Mamiya, T. Mori and J. Tsubaki : “Solidification mechanism of the sedimentation layer formed by particle settling”, Proceedings of The Third Asian Particle Technology Symposium (APT2007), vol.1, 457-464 (2007), Beijing, China

17. T. Mori, T. Katsuoka, B. Ochirkhuyag, J. Tsubaki, T. Sugimoto and H. Choi : “Development of a novel high performance continuous cake-less filtration system”, Proceedings of 10th World Filtration Congress, vol.2, 340-344 (2008)

18. H. Satone, T. Mamiya, T. Mori, and J. Tsubaki : “Solidification Mechanism of the Sediment Formed by Particle Settling”, Abstracts of 10th International Conference on Ceramic Processing Science (ICCPS-10), P47, Inuyama, Japan (2008)

19. I. Inamine, T. Hida, K. Suzuki, T. Mori and J. Tsubaki : “Adsorption Behavior of Polyelectrolyte on Ceramic Particles”, Abstracts of 10th International Conference on Ceramic Processing Science (ICCPS-10), P63, Inuyama, Japan (2008)

20. T. Mori, N. Hirasawa, R. Ito and J. Tsubaki:”Ceramic Coating on Metal Substrate by Electrophoretic Deposition Assisted by Sweeping Flow in Aqueous Suspension”, Abstracts of 3rd International Conference on Electrophoretic Deposition:Fundamentals and Applications, P5, Awaji Island, Japan (2008)

21. T. Mori, T. Hida, K. Suzuki, I. Inamine, T. Kiguchi, and J. Tsubaki : “Adsorption Behavior of Polyelectrolyte onto Alumina Particles and its Effect on the Particles’ Dispersion State”, Abstracts of 10th Australia-Japan Colloid and Interface Science Symposium, P200, Adelaide, Australia (2009)

22. Tsubaki, J., H. Satone, T. Katsuoka, T. Hirata and T. Mori : “Development of a High Performance Continuous Cake-less Filtration System, Abstracts of 10th Australia-Japan Colloid and Interface Science Symposium, P231, Adelaide, Australia (2009)

23. Kimura, T., K. Nakaushiro, H. Kariya, T. Mori and J. Tsubaki : Role of moisture in dough hardness, The Forth Asian Particle Technology Symposium (APT2009) CD-ROM (2009)

24. T. Mori, H. Satone, T. Hirata and J. Tsubaki : “Development of a novel high performance cake-less filtration system”, Water Pollution 2010 (9-11 June 2010), Intercontinental Hotel, Bucharest, Romania, 11 June 2010

25. [invited lecture] T. Mori, T. Kiguchi, J. Tsubaki, J. P. O’shea and G. V. Franks : “Evaluation of particles dispersion and flocculation in slurries containing temperature responsive polymer by hydrostatic pressure measurement”, Proceedings of The 19th Nisshin Engineering Particle Technology International Seminar, 67-76, (2010)

26. [keynote lecture] T. Mori, : “Characterization of particle dispersion and flocculation in suspensions -From nano to micron particle suspensions- “, 5th Asian Particle Technology Symposium, CD-ROM, (2012)